Introduction

This is a list of the monero-wallet-rpc calls, their inputs and outputs, and examples of each. The program monero-wallet-rpc replaced the rpc interface that was in simplewallet and then monero-wallet-cli.

All monero-wallet-rpc methods use the same JSON RPC interface. For example:

IP=127.0.0.1
PORT=18082
METHOD="make_integrated_address"
PARAMS="{\"payment_id\":\"1234567890123456789012345678900012345678901234567890123456789000\"}"
curl \
    -X POST http://$IP:$PORT/json_rpc \
    -d '{"jsonrpc":"2.0","id":"0","method":"'$METHOD'","params":'"$PARAMS"'}' \
    -H 'Content-Type: application/json'

If the monero-wallet-rpc was executed with the --rpc-login argument as username:password, then follow this example:

IP=127.0.0.1
PORT=18082
METHOD="make_integrated_address"
PARAMS="{\"payment_id\":\"1234567890123456789012345678900012345678901234567890123456789000\"}"
curl \
    -u username:password --digest \
    -X POST http://$IP:$PORT/json_rpc \
    -d '{"jsonrpc":"2.0","id":"0","method":"'$METHOD'","params":'"$PARAMS"'}' \
    -H 'Content-Type: application/json'

Note: "atomic units" refer to the smallest fraction of 1 XMR according to the monerod implementation. 1 XMR = 1e12 atomic units.

Index of JSON RPC Methods:


JSON RPC Methods:

getbalance

Return the wallet's balance.

Inputs:

  • account_index - unsigned int; Return balance for this account.

Outputs:

  • balance - unsigned int; The total balance of the current monero-wallet-rpc in session.
  • unlocked_balance - unsigned int; Unlocked funds are those funds that are sufficiently deep enough in the Monero blockchain to be considered safe to spend.
  • multisig_import_needed - boolean; True if importing multisig data is needed for returning a correct balance.
  • per_subaddress - array of subaddress information; Balance information for each subaddress in an account.
    • address_index - unsigned int; Index of the subaddress in the account.
    • address - string; Address at this index. Base58 representation of the public keys.
    • balance - unsigned int; Balance for the subaddress (locked or unlocked).
    • unlocked_balance - unsigned int; Unlocked balance for the subaddress.
    • label - string; Label for the subaddress.
    • num_unspent_outputs - unsigned int; Number of unspent outputs available for the subaddress.

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"getbalance","params":{"account_index":0}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "balance": 140000000000,
    "unlocked_balance": 50000000000,
    "multisig_import_needed": false,
    "per_subaddress": {
      "address_index": 0,
      "address": "427ZuEhNJQRXoyJAeEoBaNW56ScQaLXyyQWgxeRL9KgAUhVzkvfiELZV7fCPBuuB2CGuJiWFQjhnhhwiH1FsHYGQGaDsaBA",
      "balance": 140000000000,
      "unlocked_balance": 50000000000,
      "label": "",
      "num_unspent_outputs": 42
    }
  }
}

getaddress

Return the wallet's addresses for an account. Optionally filter for specific set of subaddresses.

Inputs:

  • account_index - unsigned int; Return subaddresses for this account.
  • address_index - array of unsigned int; (Optional) List of subaddresses to return from an account.

Outputs:

  • address - string; The 95-character hex address string of the monero-wallet-rpc in session.

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"getaddress","params":{"account_index":0,"address_index":[0,1]}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "address": "427ZuEhNJQRXoyJAeEoBaNW56ScQaLXyyQWgxeRL9KgAUhVzkvfiELZV7fCPBuuB2CGuJiWFQjhnhhwiH1FsHYGQGaDsaBA",
    "addresses": [{
          "address": "427ZuEhNJQRXoyJAeEoBaNW56ScQaLXyyQWgxeRL9KgAUhVzkvfiELZV7fCPBuuB2CGuJiWFQjhnhhwiH1FsHYGQGaDsaBA",
          "address_index": 0,
          "label": "Primary account",
          "used": false
        },{
          "address": "88bV1uo76AaKZaWD389kCf5EfPxKFYEKUQbs9ZRJm23E2X2oYgV9bQ54FiY6hAB83aDXMUSZF6KWyfeQqzLqaAeeFrk9iic",
          "address_index": 1,
          "label": "",
          "used": false
        }]
  }
}

getheight

Returns the wallet's current block height.

Inputs: None.

Outputs:

  • height - unsigned int; The current monero-wallet-rpc's blockchain height. If the wallet has been offline for a long time, it may need to catch up with the daemon.

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"getheight"}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "height": 994310
  }
}

transfer

Send monero to a number of recipients.

Inputs:

  • destinations - array of destinations to receive XMR:
    • amount - unsigned int; Amount to send to each destination, in atomic units.
    • address - string; Destination public address.
  • account_index - unsigned int; Transfer from this account index.
  • subaddr_indices - array of unsigned int; Transfer from this set of subaddresses.
  • fee - unsigned int; Ignored, will be automatically calculated.
  • mixin - unsigned int; Number of outpouts from the blockchain to mix with (0 means no mixing).
  • unlock_time - unsigned int; Number of blocks before the monero can be spent (0 to not add a lock).
  • payment_id - string; (Optional) Random 32-byte/64-character hex string to identify a transaction.
  • get_tx_key - boolean; (Optional) Return the transaction key after sending.
  • priority - unsigned int; Set a priority for the transaction. Accepted Values are: 0-3 for: default, unimportant, normal, elevated, priority.
  • do_not_relay - boolean; (Optional) If true, the newly created transaction will not be relayed to the monero network. (Defaults to false)
  • get_tx_hex - boolean; Return the transaction as hex string after sending
  • get_tx_metadata - boolean; Return the metadata needed to relay the transaction.

Outputs:

  • fee - Integer value of the fee charged for the txn.
  • tx_hash - String for the publically searchable transaction hash
  • tx_key - String for the transaction key if get_tx_key is true, otherwise, blank string.
  • amount_keys - List of strings for the amount keys.
  • amount - Amount transferred for the transaction.
  • tx_blob - Raw transaction represented as hex string, if get_tx_hex is true.
  • tx_metadata - Set of transaction metadata needed to relay this transfer later, if get_tx_metadata is true.
  • multisig_txset - Set of multisig transactions in the process of being signed (empty for non-multisig).

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"transfer","params":{"destinations":[{"amount":100000000,"address":"9wNgSYy2F9qPZu7KBjvsFgZLTKE2TZgEpNFbGka9gA5zPmAXS35QzzYaLKJRkYTnzgArGNX7TvSqZC87tBLwtaC5RQgJ8rm"},{"amount":200000000,"address":"9vH5D7Fv47mbpCpdcthcjU34rqiiAYRCh1tYywmhqnEk9iwCE9yppgNCXAyVHG5qJt2kExa42TuhzQfJbmbpeGLkVbg8xit"}],"mixin":4,"get_tx_key": true}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "fee": 48958481211,
    "tx_hash": "985180f468637bc6d2f72ee054e1e34b8d5097988bb29a2e0cb763e4464db23c",
    "tx_key": "8d62e5637f1fcc9a8904057d6bed6c697618507b193e956f77c31ce662b2ee07",
    "amount_keys":[],
    "amount": 300000000,
    "tx_blob": "",
    "tx_metadata": "",
    "multisig_txset": ""
  }
}

transfer_split

Same as transfer, but can split into more than one tx if necessary.

Inputs:

  • destinations - array of destinations to receive XMR:
    • amount - unsigned int; Amount to send to each destination, in atomic units.
    • address - string; Destination public address.
  • account_index - unsigned int; Transfer from this account.
  • subaddr_indices - array of unsigned int; Transfer from this set of subaddresses.
  • mixin - unsigned int; Number of outputs from the blockchain to mix with (0 means no mixing).
  • ring_size - unsigned int; Sets ringsize to n (mixin + 1).
  • unlock_time - unsigned int; Number of blocks before the monero can be spent (0 to not add a lock).
  • payment_id - string; (Optional) Random 32-byte/64-character hex string to identify a transaction.
  • get_tx_keys - boolean; (Optional) Return the transaction keys after sending. – Ignored
  • priority - unsigned int; Set a priority for the transactions. Accepted Values are: 0-3 for: default, unimportant, normal, elevated, priority.
  • do_not_relay - boolean; (Optional) If true, the newly created transaction will not be relayed to the monero network. (Defaults to false)
  • get_tx_hex - boolean; Return the transactions as hex string after sending
  • new_algorithm - boolean; True to use the new transaction construction algorithm, defaults to false.
  • get_tx_metadata - boolean; Return list of transaction metadata needed to relay the transfer later.

Outputs:

  • fee_list - array of: integer. The amount of fees paid for every transaction.
  • tx_hash_list - array of: string. The tx hashes of every transaction.
  • tx_blob_list - array of: string. The tx as hex string for every transaction.
  • amount_list - array of: integer. The amount transferred for every transaction..
  • tx_key_list - array of: string. The transaction keys for every transaction.
  • tx_metadata_list - array of: string. List of transaction metadata needed to relay the transactions later.
  • multisig_txset - string. The set of signing keys used in a multisig transaction (empty for non-multisig).

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"transfer_split","params":{"destinations":[{"amount":100000000,"address":"9wNgSYy2F9qPZu7KBjvsFgZLTKE2TZgEpNFbGka9gA5zPmAXS35QzzYaLKJRkYTnzgArGNX7TvSqZC87tBwtaC5RQgJ8rm"},{"amount":200000000,"address":"9vH5D7Fv47mbpCpdcthcjU34rqiiAYRCh1tYywmhqnEk9iwCE9yppgNCXAyVHG5qJt2kExa42TuhzQfJbmbpeGLkVbg8xit"},{"amount":200000000,"address":"9vC5Q25cR1d3WzKX6dpTaLJaqZyDrtTnfadTmVuB1Wue2tyFGxUhiE4RGa74pEDJv7gSySzcd1Ao6G1nzSaqp78vLfP6MPj"},{"amount":200000000,"address":"A2MSrn49ziBPJBh8ZNEhhbfyLMou6mao4C1F5TLGUatmUnCxZArDYkcbAnVkVEopWVeak2rKDrmc8JpoS7n5dvfN9YDPBTG"},{"amount":200000000,"address":"9tEDyVQ8zgRQbDYiykTdpw5kZ6qWQWcKfExEj9eQshjpGb3sdr3UyWE2AHWzUGzJjaH9HN1DdGBdyQQ4AqGMc7rr5xYwZWW"}],"mixin":4,"get_tx_key": true, "new_algorithm": true}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "fee_list": [97916962422],
    "tx_hash_list": ["c5c389846e701c27aaf1f7ab8b9dc457b471fcea5bc9710e8020d51275afbc54"]
  }
}

sweep_dust

Send all dust outputs back to the wallet's, to make them easier to spend (and mix).

Inputs: None.

Outputs:

  • tx_hash_list - list of: string

Example (In this example, sweep_dust returns an error due to insufficient funds to sweep):

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"sweep_dust"}' -H 'Content-Type: application/json'

{
  "error": {
    "code": -4,
    "message": "not enough money"
  },
  "id": "0",
  "jsonrpc": "2.0"
}

sweep_all

Send all unlocked balance to an address.

Inputs:

  • address - string; Destination public address.
  • account_index - unsigned int; Sweep transactions from this account.
  • subaddr_indices - array of unsigned int; (Optional) Sweep from this set of subaddresses in the account.
  • priority - unsigned int; (Optional) Priority for sending the sweep transfer, partially determines fee.
  • mixin - unsigned int; Number of outputs from the blockchain to mix with (0 means no mixing).
  • unlock_time - unsigned int; Number of blocks before the monero can be spent (0 to not add a lock).
  • payment_id - string; (Optional) Random 32-byte/64-character hex string to identify a transaction.
  • get_tx_keys - boolean; (Optional) Return the transaction keys after sending.
  • below_amount - unsigned int; (Optional) Include outputs below this amount.
  • do_not_relay - boolean; (Optional) If true, do not relay this sweep transfer.
  • get_tx_hex - boolean; (Optional) return the transactions as hex encoded string.
  • get_tx_metadata - boolean; (Optional) return the transaction metadata as a string.

Outputs:

  • tx_hash_list - array of string; List of transaction hashes used as transaction IDs.
  • tx_key_list - array of string; List of public and private transaction keys.
  • tx_blob_list - array of string; List of transactions represented as a hex blob.
  • tx_metadata_list - array of string; Transaction metadata needed for relaying.
  • multisig_txset - string; Set of multisig transactions in the process of being signed.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"sweep_all","params":{"address":"9sS8eRU2b5ZbN2FPSrpkiab1bjbHE5XtL6Ti6We3Fhw5aQPudRfVVypjgzKDNkxtvTQSPs122NKggb2mqcqkKSeMNVu59S","mixin":2,"unlock_time":0,"get_tx_keys":true}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "tx_hash_list": ["53a3648797d5524dd037d4105e067fa61468faecab41927fc43adbb26c202d22"],
    "tx_key_list": ["e83b3b78235e36cd7e4d9695efd81a3b3e64c7d1f1ebd61892f0a7add6a50301"]
  }
}

store

Save the blockchain.

Inputs: None.

Outputs: None.

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"store"}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
  }
}

get_payments

Get a list of incoming payments using a given payment id.

Inputs:

  • payment_id - string; Payment ID used to find the payments.

Outputs:

  • payments - list of:
    • payment_id - string; Payment ID matching the input parameter.
    • tx_hash - string; Transaction hash used as the transaction ID.
    • amount - unsigned int; Amount for this payment.
    • block_height - unsigned int; Height of the block that first confirmed this payment.
    • unlock_time - unsigned int; Time (in block height) until this payment is safe to spend.
    • subaddr_index - subaddress index:
      • major - unsigned int; Account index for the subaddress.
      • minor - unsigned int; Index of the subaddress in the account.
    • address - string; Address receiving the payment; Base58 representation of the public keys.

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"get_payments","params":{"payment_id":"4279257e0a20608e25dba8744949c9e1caff4fcdafc7d5362ecf14225f3d9030"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "payments": [{
      "amount": 10350000000000,
      "block_height": 994327,
      "payment_id": "4279257e0a20608e25dba8744949c9e1caff4fcdafc7d5362ecf14225f3d9030",
      "tx_hash": "c391089f5b1b02067acc15294e3629a463412af1f1ed0f354113dd4467e4f6c1",
      "unlock_time": 0
      "subaddr_index": {
        "major": 0,
        "minor": 0,
      },
      "address": "427ZuEhNJQRXoyJAeEoBaNW56ScQaLXyyQWgxeRL9KgAUhVzkvfiELZV7fCPBuuB2CGuJiWFQjhnhhwiH1FsHYGQGaDsaBA"
    }]
  }
}

get_bulk_payments

Get a list of incoming payments using a given payment id, or a list of payments ids, from a given height. This method is the preferred method over get_payments because it has the same functionality but is more extendable. Either is fine for looking up transactions by a single payment ID.

Inputs:

  • payment_ids - array of: string; Payment IDs used to find the payments.
  • min_block_height - unsigned int; The block height at which to start looking for payments.

Outputs:

  • payments - list of:
    • payment_id - string; Payment ID matching one of the input IDs.
    • tx_hash - string; Transaction hash used as the transaction ID.
    • amount - unsigned int; Amount for this payment.
    • block_height - unsigned int; Height of the block that first confirmed this payment.
    • unlock_time - unsigned int; Time (in block height) until this payment is safe to spend.
    • subaddr_index - subaddress index:
      • major - unsigned int; Account index for the subaddress.
      • minor - unsigned int; Index of the subaddress in the account.
    • address - string; Address receiving the payment; Base58 representation of the public keys.

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"get_bulk_payments","params":{"payment_ids":["4279257e0a20608e25dba8744949c9e1caff4fcdafc7d5362ecf14225f3d9030"],"min_block_height":990000}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "payments": [{
      "amount": 10350000000000,
      "block_height": 994327,
      "payment_id": "4279257e0a20608e25dba8744949c9e1caff4fcdafc7d5362ecf14225f3d9030",
      "tx_hash": "c391089f5b1b02067acc15294e3629a463412af1f1ed0f354113dd4467e4f6c1",
      "unlock_time": 0
      "subaddr_index": {
        "major": 0,
        "minor": 1,
      },
      "address": "88bV1uo76AaKZaWD389kCf5EfPxKFYEKUQbs9ZRJm23E2X2oYgV9bQ54FiY6hAB83aDXMUSZF6KWyfeQqzLqaAeeFrk9iic"
    }]
  }
}

get_transfers

Returns a list of transfers.

Inputs:

  • in - boolean; (Optional) Include incoming transfers.
  • out - boolean; (Optional) Include outgoing transfers.
  • pending - boolean; (Optional) Include pending transfers.
  • failed - boolean; (Optional) Include failed transfers.
  • pool - boolean; (Optional) Include transfers from the daemon's transaction pool.
  • filter_by_height - boolean; (Optional) Filter transfers by block height.
  • min_height - unsigned int; (Optional) Minimum block height to scan for transfers, if filtering by height is enabled.
  • max_height - unsigned int; (Opional) Maximum block height to scan for transfers, if filtering by height is enabled.
  • account_index - unsigned int; (Optional) Index of the account to query for transfers.
  • subaddr_indices - array of unsigned int; (Optional) List of subaddress indices to query for transfers.

Outputs:

  • in array of transfers:
    • txid - string; Transaction ID for this transfer.
    • payment_id - string; Payment ID for this transfer.
    • height - unsigned int; Height of the first block that confirmed this transfer.
    • timestamp - unsigned int; POSIX timestamp for when this transfer was first confirmed in a block.
    • amount - unsigned int; Amount transferred.
    • fee - unsigned int; Transaction fee for this transfer.
    • note - string; Note about this transfer.
    • destinations - array of transfer destinations:
      • amount - unsigned int; Amount for this destination.
      • address - string; Address for this destination. Base58 representation of the public keys.
    • type - string; Transfer type: "in"
  • out array of transfers:
    • txid - string; Transaction ID for this transfer.
    • payment_id - string; Payment ID for this transfer.
    • height - unsigned int; Height of the first block that confirmed this transfer.
    • timestamp - unsigned int; POSIX timestamp for when this transfer was first confirmed in a block.
    • amount - unsigned int; Amount transferred.
    • fee - unsigned int; Transaction fee for this transfer.
    • note - string; Note about this transfer.
    • destinations - array of transfer destinations:
      • amount - unsigned int; Amount for this destination.
      • address - string; Address for this destination. Base58 representation of the public keys.
    • type - string; Transfer type: "out"
  • pending array of transfers:
    • txid - string; Transaction ID for this transfer.
    • payment_id - string; Payment ID for this transfer.
    • height - unsigned int; 0, this transfer is not yet confirmed in a block.
    • timestamp - unsigned int; POSIX timestamp for when this transfer was sent.
    • amount - unsigned int; Amount transferred.
    • fee - unsigned int; Transaction fee for this transfer.
    • note - string; Note about this transfer.
    • destinations - array of transfer destinations:
      • amount - unsigned int; Amount for this destination.
      • address - string; Address for this destination. Base58 representation of the public keys.
    • type - string; Transfer type: "pending"
  • failed array of transfers:
    • txid - string; Transaction ID for this transfer.
    • payment_id - string; Payment ID for this transfer.
    • height - unsigned int; 0, this transfer will not be confirmed in a block.
    • timestamp - unsigned int; POSIX timestamp for when this transfer was sent.
    • amount - unsigned int; Amount transferred.
    • fee - unsigned int; Transaction fee for this transfer.
    • note - string; Note about this transfer.
    • destinations - array of transfer destinations:
      • amount - unsigned int; Amount for this destination.
      • address - string; Address for this destination. Base58 representation of the public keys.
    • type - string; Transfer type: "failed"
  • pool array of transfers:
    • txid - string; Transaction ID for this transfer.
    • payment_id - string; Payment ID for this transfer.
    • height - unsigned int; 0, this transfer is not yet confirmed in a block.
    • timestamp - unsigned int; POSIX timestamp for when this transfer was last seen in the transaction pool.
    • amount - unsigned int; Amount transferred.
    • fee - unsigned int; Transaction fee for this transfer.
    • note - string; Note about this transfer.
    • destinations - array of transfer destinations:
      • amount - unsigned int; Amount for this destination.
      • address - string; Address for this destination. Base58 representation of the public keys.
    • type - string; Transfer type: "pool"

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"get_transfers","params":{"pool":true}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "pool": [{
      "amount": 500000000000,
      "fee": 0,
      "height": 0,
      "note": "",
      "payment_id": "758d9b225fda7b7f",
      "timestamp": 1488312467,
      "txid": "da7301d5423efa09fabacb720002e978d114ff2db6a1546f8b820644a1b96208",
      "type": "pool"
    }]
  }
}

get_transfer_by_txid

Show information about a transfer to/from this address.

Inputs:

  • txid - string; Transaction ID used to find the transfer.
  • account_index - unsigned int; (Optional) Index of the account to query for the transfer.

Outputs:

  • transfer - JSON object containing payment information:
    • amount - unsigned int; Amount of this transfer.
    • fee - unsigned int; Transaction fee for this transfer.
    • height - unsigned int; Height of the first block that confirmed this transfer.
    • note - string; Note about this transfer.
    • payment_id - string; Payment ID for this transfer.
    • timestamp - unsigned int; POSIX timestamp for the block that confirmed this transfer.
    • txid - string; Transaction ID of this transfer (same as input TXID).
    • type - string; Type of transfer, one of the following: "in", "out", "pending", "failed", "pool"
    • destinations - array of JSON objects containing transfer destinations:
      • amount - unsigned int; Amount transferred to this destination.
      • address - string; Address for this destination. Base58 representation of the public keys.
    • unlock_time - unsigned int; Number of blocks until transfer is safely spendable.
    • subaddr_index - JSON object containing the major & minor subaddress index:
      • major - unsigned int; Account index for the subaddress.
      • minor - unsigned int; Index of the subaddress under the account.
    • address - string; Address that transferred the funds. Base58 representation of the public keys.
    • double_spend_seen - boolean; True if the key image(s) for the transfer have been seen before.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"get_transfer_by_txid","params":{"txid":"f2d33ba969a09941c6671e6dfe7e9456e5f686eca72c1a94a3e63ac6d7f27baf"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "transfer": {
      "amount": 10000000000000,
      "fee": 0,
      "height": 1316388,
      "note": "",
      "payment_id": "0000000000000000",
      "timestamp": 1495539310,
      "txid": "f2d33ba969a09941c6671e6dfe7e9456e5f686eca72c1a94a3e63ac6d7f27baf",
      "type": "in"
      "destinations": [
        "amount": 10000000000000,
        "address": "88bV1uo76AaKZaWD389kCf5EfPxKFYEKUQbs9ZRJm23E2X2oYgV9bQ54FiY6hAB83aDXMUSZF6KWyfeQqzLqaAeeFrk9iic"
      ],
      "unlock_time": 0,
      "subaddr_index": {
        "major": 0,
        "minor": 0
      },
      "address": "427ZuEhNJQRXoyJAeEoBaNW56ScQaLXyyQWgxeRL9KgAUhVzkvfiELZV7fCPBuuB2CGuJiWFQjhnhhwiH1FsHYGQGaDsaBA",
      "double_spend_seen": false
    }
  }
}

incoming_transfers

Return a list of incoming transfers to the wallet.

Inputs:

  • transfer_type - string; "all": all the transfers, "available": only transfers which are not yet spent, OR "unavailable": only transfers which are already spent.
  • account_index - unsigned int; (Optional) Return transfers for this account.
  • subaddr_indices - array of unsigned int; (Optional) Return transfers sent to these subaddresses.
  • verbose - boolean; (Optional) Enable verbose output, return key image if true.

Outputs:

  • transfers - list of:
    • amount - unsigned int; Amount of this transfer.
    • spent - boolean; Indicates if this transfer has been spent.
    • global_index - unsigned int; Mostly internal use, can be ignored by most users.
    • tx_hash - string; Several incoming transfers may share the same hash if they were in the same transaction.
    • tx_size - unsigned int; Size of transaction in bytes.
    • subaddr_index - unsigned int; Subaddress index for incoming transfer.
    • key_image - string; Key image for the incoming transfer's unspent output (empty unless verbose is true).

Example (Return "all" transaction types):

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"incoming_transfers","params":{"transfer_type":"all"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "transfers": [{
      "amount": 10000000000000,
      "global_index": 711506,
      "spent": false,
      "tx_hash": "<c391089f5b1b02067acc15294e3629a463412af1f1ed0f354113dd4467e4f6c1>",
      "tx_size": 5870,
      "subaddr_index": 0,
      "key_image": ""
    },{
      "amount": 300000000000,
      "global_index": 794232,
      "spent": false,
      "tx_hash": "<c391089f5b1b02067acc15294e3629a463412af1f1ed0f354113dd4467e4f6c1>",
      "tx_size": 5870,
      "subaddr_index": 0,
      "key_image": ""
    },{
      "amount": 50000000000,
      "global_index": 213659,
      "spent": false,
      "tx_hash": "<c391089f5b1b02067acc15294e3629a463412af1f1ed0f354113dd4467e4f6c1>",
      "tx_size": 5870,
      "subaddr_index": 0,
      "key_image": ""
    }]
  }
}

Example (Return "available" transactions):

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"incoming_transfers","params":{"transfer_type":"available"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "transfers": [{
      "amount": 10000000000000,
      "global_index": 711506,
      "spent": false,
      "tx_hash": "<c391089f5b1b02067acc15294e3629a463412af1f1ed0f354113dd4467e4f6c1>",
      "tx_size": 5870,
      "subaddr_index": 0,
      "key_image": ""
    },{
      "amount": 300000000000,
      "global_index": 794232,
      "spent": false,
      "tx_hash": "<c391089f5b1b02067acc15294e3629a463412af1f1ed0f354113dd4467e4f6c1>",
      "tx_size": 5870,
      "subaddr_index": 0,
      "key_image": ""
    },{
      "amount": 50000000000,
      "global_index": 213659,
      "spent": false,
      "tx_hash": "<c391089f5b1b02067acc15294e3629a463412af1f1ed0f354113dd4467e4f6c1>",
      "tx_size": 5870,
      "subaddr_index": 0,
      "key_image": ""
    }]
  }
}

Example (Return "unavailable" transaction. Note that this particular example returns 0 unavailable transactions):

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"incoming_transfers","params":{"transfer_type":"unavailable"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
  }
}

query_key

Return the spend or view private key.

Inputs:

  • key_type - string; Which key to retrieve: "mnemonic" - the mnemonic seed (older wallets do not have one) OR "view_key" - the view key

Outputs:

  • key - string; The view key will be hex encoded, while the mnemonic will be a string of words.

Example (Query view key):

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"query_key","params":{"key_type":"view_key"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "key": "7e341d..."
  }
}

Example (Query mnemonic key):

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"query_key","params":{"key_type":"mnemonic"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "key": "adapt adapt nostril ..."
  }
}

make_integrated_address

Make an integrated address from the wallet address and a payment id.

Inputs:

  • payment_id - string; hex encoded; can be empty, in which case a random payment id is generated

Outputs:

  • integrated_address - string

Example (Payment ID is empty, use a random ID):

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"make_integrated_address","params":{"payment_id":""}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "integrated_address": "4BpEv3WrufwXoyJAeEoBaNW56ScQaLXyyQWgxeRL9KgAUhVzkvfiELZV7fCPBuuB2CGuJiWFQjhnhhwiH1FsHYGQQ8H2RRJveAtUeiFs6J"
  }
}

split_integrated_address

Retrieve the standard address and payment id corresponding to an integrated address.

Inputs:

  • integrated_address - string

Outputs:

  • standard_address - string
  • payment - string; hex encoded

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"split_integrated_address","params":{"integrated_address": "4BpEv3WrufwXoyJAeEoBaNW56ScQaLXyyQWgxeRL9KgAUhVzkvfiELZV7fCPBuuB2CGuJiWFQjhnhhwiH1FsHYGQQ8H2RRJveAtUeiFs6J"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "payment_id": "<420fa29b2d9a49f5>",
    "standard_address": "427ZuEhNJQRXoyJAeEoBaNW56ScQaLXyyQWgxeRL9KgAUhVzkvfiELZV7fCPBuuB2CGuJiWFQjhnhhwiH1FsHYGQGaDsaBA"
  }
}

stop_wallet

Stops the wallet, storing the current state.

Inputs: None.

Outputs: None.

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"stop_wallet"}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
  }
}

make_uri

Create a payment URI using the official URI spec.

Inputs:

  • address - wallet address string
  • amount (optional) - the integer amount to receive, in atomic units
  • payment_id (optional) - 16 or 64 character hexadecimal payment id string
  • recipient_name (optional) - string name of the payment recipient
  • tx_description (optional) - string describing the reason for the tx

Outputs:

  • uri - a string containing all the payment input information as a properly formatted payment URI

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"make_uri","params":{"address":"44AFFq5kSiGBoZ4NMDwYtN18obc8AemS33DBLWs3H7otXft3XjrpDtQGv7SqSsaBYBb98uNbr2VBBEt7f2wfn3RVGQBEP3A","amount":10,"payment_id":"0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef","tx_description":"Testing out the make_uri function.","recipient_name":"Monero Project donation address"}}'  -H 'Content-Type: application/json'

{
  "id": 0,
  "jsonrpc": "2.0",
  "result": {
    "uri": "monero:44AFFq5kSiGBoZ4NMDwYtN18obc8AemS33DBLWs3H7otXft3XjrpDtQGv7SqSsaBYBb98uNbr2VBBEt7f2wfn3RVGQBEP3A?tx_payment_id=0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef&tx_amount=0.000000000010&recipient_name=Monero%20Project%20donation%20address&tx_description=Testing%20out%20the%20make_uri%20function."
  }
}

parse_uri

Parse a payment URI to get payment information.

Inputs:

  • uri - a string containing all the payment input information as a properly formatted payment URI

Outputs:

  • uri - JSON object containing payment information:
    • address - wallet address string
    • amount - the decimal amount to receive, in coin units (0 if not provided)
    • payment_id - 16 or 64 character hexadecimal payment id string (empty if not provided)
    • recipient_name - string name of the payment recipient (empty if not provided)
    • tx_description - string describing the reason for the tx (empty if not provided)

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"parse_uri","params":{"uri":"monero:44AFFq5kSiGBoZ4NMDwYtN18obc8AemS33DBLWs3H7otXft3XjrpDtQGv7SqSsaBYBb98uNbr2VBBEt7f2wfn3RVGQBEP3A?tx_payment_id=0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef&tx_amount=0.000000000010&recipient_name=Monero%20Project%20donation%20address&tx_description=Testing%20out%20the%20make_uri%20function."}}' -H 'Content-Type: application/json'

{
  "id": 0,
  "jsonrpc": "2.0",
  "result": {
    "uri": {
      "address": "44AFFq5kSiGBoZ4NMDwYtN18obc8AemS33DBLWs3H7otXft3XjrpDtQGv7SqSsaBYBb98uNbr2VBBEt7f2wfn3RVGQBEP3A",
      "amount": 10,
      "payment_id": "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef",
      "recipient_name": "Monero Project donation address",
      "tx_description": "Testing out the make_uri function."
    }
  }
}

rescan_blockchain

Rescan blockchain from scratch.

Inputs: None.

Outputs: None.

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"rescan_blockchain" -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
  }
}

set_tx_notes

Set arbitrary string notes for transactions.

Inputs:

  • txids - array of string; transaction ids
  • notes - array of string; notes for the transactions

Outputs: None.

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"set_tx_notes","params":{"txids":["6a1a100c079c236e2cbf36f7760e8ef1a9e8357c434aa790a8c78de653ec4cf2"],"notes":["This is an example"]}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
  }
}

get_tx_notes

Get string notes for transactions.

Inputs:

  • txids - array of string; transaction ids

Outputs:

  • notes - array of string; notes for the transactions

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"get_tx_notes","params":{"txids":["6a1a100c079c236e2cbf36f7760e8ef1a9e8357c434aa790a8c78de653ec4cf2"]}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "notes": ["This is an example"]
  }
}

sign

Sign a string.

Inputs:

  • data - string;

Outputs:

  • signature - string;

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"sign","params":{"data":"This is sample data to be signed"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "signature": "SigV1Xp61ZkGguxSCHpkYEVw9eaWfRfSoAf36PCsSCApx4DUrKWHEqM9CdNwjeuhJii6LHDVDFxvTPijFsj3L8NDQp1TV"
  }
}

verify

Verify a signature on a string.

Inputs:

  • data - string;
  • address - string;
  • signature - string;

Outputs:

  • good - boolean;

Example:

$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"verify","params":{"data":"This is sample data to be signed","address":"9sS8eRU2b5ZbN2FPSrpkiab1bjbHE5XtL6Ti6We3Fhw5aQPudRfVVypjgzKDNkxtvTQZSPs122NKggb2mqcqkKSeMNVu59S","signature":"SigV1Xp61ZkGguxSCHpkYEVw9eaWfRfSoAf36PCsSCApx4DUrKWHEqM9CdNwjeuhJii6LHDVDFxvTPijFsj3L8NDQp1TV"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "good": true
  }
}

export_key_images

Export a signed set of key images.

Inputs: None.

Outputs:

  • signed_key_images - array of signed key images:
    • key_image - string;
    • signature - string;

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"export_key_images"}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "signed_key_images": [{
      "key_image": "62b83df78baad99e23b5ad3f667bc6f8d388a13d9e84c7bb6c223a556dfd34af",
      "signature": "b87b7e989aa85aa3a2a7cd8adcb3a848d3512ff718b168e15217ff3e5da29c0183c0328b97cc052fcb5ee3548aa5e41e530ba9d854199ea19d7ddaf6a54a4c0a"
    }]
  }
}

import_key_images

Import signed key images list and verify their spent status.

Inputs:

  • signed_key_images - array of signed key images:
    • key_image - string;
    • signature - string;

Outputs:

  • height - unsigned int;
  • spent - unsigned int;
  • unspent - unsigned int;

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"import_key_images", "params":{"signed_key_images":[{"key_image":"63b83df78cafd99e23b5ad3f667bc6f8d38813d9e84c7bb6c223a556dfd34af","signature":"b87b7e989aa86aa2a7a7cd8adcb3a848d3512ff718b168e15217ff3e5da29c0183c0328b97cc052fcb5ee3548aa5e41e530ba9d854199ea19d7ddaf6a54a4c0a"},{"key_image":"44ec12fbc56c533a30b09de8ae26febd515528c4957dfe875430377a7e212b4e","signature":"91105f15be0b25bc2a94bd78a7e261608974d6d888080b9f1815655b98af190340325ea1a0840a5951dacf913d4de1b2bd33ea59c1cb7bce1b6648afa7133d03"}]}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "height": 986050,
    "spent": 10000100000000,
    "unspent": 4979852760000
  }
}

get_address_book

Retrieves entries from the address book.

Inputs:

  • entries - array of unsigned int; indices of the requested address book entries

Outputs:

  • entries - array of entries:
    • address - string;
    • description - string;
    • index - unsigned int;
    • payment_id - string;

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"get_address_book","params":{"entries":[1,2]}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "entries": [{
      "address": "A135xq3GVMdU5qtAm4hN7zjPgz8bRaiSUQmtuDdjZ6CgXayvQruJy3WPe95qj873JhK4YdTQjoR39Leg6esznQk8PckhjRN",
      "description": "",
      "index": 1,
      "payment_id": "0000000000000000000000000000000000000000000000000000000000000000"
    },{
      "address": "A135xq3GVMdU5qtAm4hN7zjPgz8bRaiSUQmtuDdjZ6CgXayvQruJy3WPe95qj873JhK4YdTQjoR39Leg6esznQk8PckhjRN",
      "description": "",
      "index": 2,
      "payment_id": "0000000000000000000000000000000000000000000000000000000000000000"
    }]
  }
}

add_address_book

Add an entry to the address book.

Inputs:

  • address - string;
  • payment_id - (optional) string, defaults to "0000000000000000000000000000000000000000000000000000000000000000";
  • description - (optional) string, defaults to "";

Outputs:

  • index - unsigned int; The index of the address book entry.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"add_address_book","params":{"address":"44AFFq5kSiGBoZ4NMDwYtN18obc8AemS33DBLWs3H7otXft3XjrpDtQGv7SqSsBYBb98uNbr2VBBEt7f2wfn3RVGQBEP3A","description":"Donation address for the Monero project"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "index": 2
  }
}

delete_address_book

Delete an entry from the address book.

Inputs:

  • index - unsigned int; The index of the address book entry.

Outputs: None.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"delete_address_book","params":{"index":0}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
  }
}

rescan_spent

Rescan the blockchain for spent outputs.

Inputs: None.

Outputs: None.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"rescan_spent"}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
  }
}

start_mining

Start mining in the Monero daemon.

Inputs:

  • threads_count - unsigned int; Number of threads created for mining
  • do_background_mining - boolean;
  • ignore_battery - boolean;

Outputs: None.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"start_mining","params":{"threads_count":1,"do_background_mining":true,"ignore_battery":true}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
  }
}

stop_mining

Stop mining in the Monero daemon.

Inputs: None.

Outputs: None.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"stop_mining"}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
  }
}

get_languages

Get a list of available languages for your wallet's seed.

Inputs: None.

Outputs:

  • languages - array of string; List of available languages

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"get_languages"}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "languages": ["Deutsch","English","Español","Français","Italiano","Nederlands","Português","русский язык","日本語","简体中文 (中国)","Esperanto"]
  }
}

create_wallet

Create a new wallet. You need to have set the argument "–wallet-dir" when launching monero-wallet-rpc to make this work.

Inputs:

  • filename - string;
  • password - string;
  • language - string; Language for your wallets' seed.

Outputs: None.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"create_wallet","params":{"filename":"mytestwallet","password":"mytestpassword","language":"English"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
  }
}

open_wallet

Open a wallet. You need to have set the argument "–wallet-dir" when launching monero-wallet-rpc to make this work.

Inputs:

  • filename - string;
  • password - string;

Outputs: None.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"open_wallet","params":{"filename":"mytestwallet","password":"mytestpassword"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
  }
}

get_accounts

Get all accounts for a wallet. Optionally filter accounts by tag.

Inputs:

  • tag - string; (Optional) Tag for filtering accounts.

Outputs:

  • subaddress_accounts - array of subaddress account information:
    • account_index - unsigned int; Index of the account.
    • balance - unsigned int; Balance of the account (locked or unlocked).
    • base_address - string; Base64 representation of the first subaddress in the account.
    • label - string; (Optional) Label of the account.
    • tag - string; (Optional) Tag for filtering accounts.
    • unlocked_balance - unsigned int; Unlocked balance for the account.
  • total_balance - unsigned int; Total balance of the selected accounts (locked or unlocked).
  • total_unlocked_balance - unsigned int; Total unlocked balance of the selected accounts.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"get_accounts","params":{"tag":"checking"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "subaddress_accounts": [{
      "account_index": 0,
      "balance": 0,
      "base_address": "427ZuEhNJQRXoyJAeEoBaNW56ScQaLXyyQWgxeRL9KgAUhVzkvfiELZV7fCPBuuB2CGuJiWFQjhnhhwiH1FsHYGQGaDsaBA",
      "label": "Primary account",
      "tag": "checking",
      "unlocked_balance": 0
    },{
      "account_index": 1,
      "balance": 0,
      "base_address": "88bV1uo76AaKZaWD389kCf5EfPxKFYEKUQbs9ZRJm23E2X2oYgV9bQ54FiY6hAB83aDXMUSZF6KWyfeQqzLqaAeeFrk9iic",
      "label": "",
      "tag": "checking",
      "unlocked_balance": 0
    }],
    "total_balance": 0,
    "total_unlocked_balance": 0
  }
}

create_account

Create a new account with an optional label.

Inputs:

  • label - string; (Optional) Label for the account.

Outputs:

  • account_index - unsigned int; Index of the new account.
  • address - string; Address for this account. Base58 representation of the public keys.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"create_account","params":{"label":"Secondary account"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "account_index": 1,
    "address": "88bV1uo76AaKZaWD389kCf5EfPxKFYEKUQbs9ZRJm23E2X2oYgV9bQ54FiY6hAB83aDXMUSZF6KWyfeQqzLqaAeeFrk9iic"
  }
}

label_account

Label an account.

Inputs:

  • account_index - unsigned int; Apply label to account at this index.
  • label - string; Label for the account.

Outputs: None.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"label_account","params":{"account_index":0,"label":"Secondary account"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
  }
}

create_address

Create a new address for an account. Optionally, label the new address.

Inputs:

  • account_index - unsigned int; Create a new address for this account.
  • label - string; (Optional) Label for the new address.

Outputs:

  • address - string; Newly created address. Base58 representation of the public keys.
  • address_index - unsigned int; Index of the new address under the input account.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"create_address","params":{"account_index:0,"label":"Secondary account"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "address": "88bV1uo76AaKZaWD389kCf5EfPxKFYEKUQbs9ZRJm23E2X2oYgV9bQ54FiY6hAB83aDXMUSZF6KWyfeQqzLqaAeeFrk9iic",
    "address_index": 1
  }
}

label_address

Label an address.

Inputs:

  • index - subaddress index; JSON Object containing the major & minor address index:
    • major - unsigned int; Account index for the subaddress.
    • minor - unsigned int; Index of the subaddress in the account.
  • label - string; Label for the address.

Outputs: None.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"label_address","params":{"index":{"major":0,"minor":1}},"label":"Secondary account"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
  }
}

get_account_tags

Get a list of user-defined account tags.

Inputs: None.

Outputs:

  • account_tags - array of account tag information:
    • tag - string; Filter tag.
    • label - string; Label for the tag.
    • accounts - array of int; List of tagged account indices.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"get_account_tags","params":""}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
    "account_tags": [{
      "accounts": [0],
      "label": "",
      "tag": "test"
    }]
  }
}

tag_accounts

Apply a filtering tag to a list of accounts.

Inputs:

  • tag - string; Tag for the accounts.
  • accounts - array of unsigned int; Tag this list of accounts.

Outputs: None.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"tag_accounts","params":{"tag":"test","accounts":[0,1]}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
  }
}

untag_accounts

Remove filtering tag from a list of accounts.

Inputs:

  • accounts - array of unsigned int; Remove tag from this list of accounts.

Outputs: None.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"untag_accounts","params":{"accounts":[1]}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
  }
}

set_account_tag_description

Set description for an account tag.

Inputs:

  • tag - string; Set a description for this tag.
  • description - string; Description for the tag.

Outputs: None.

Example:

$ curl -X POST http://localhost:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"set_account_tag_description","params":{"tag":"test","description":"Test accounts"}}' -H 'Content-Type: application/json'

{
  "id": "0",
  "jsonrpc": "2.0",
  "result": {
  }
}